Replacement Low Profile Cradle Mount w/3M Adhesive Pad- In Stock

Currently In Stock & Ready to Ship!

Did you purchase a New Machine? Do you need to reattach your RideLite™?

Replacement Low Profile Cradle Mount w/3M Adhesive Pad- Fits RideLite's and CSS Profile (2007-2020) Models Only.

This cradle mount includes our updated improved 3M adhesive pad! This semi-perminant 3M mount will amaze you with how strong it is!! This mount & 3M pad is designed specifically for a Snowmobile/ATV application! The colder the temps drop the stronger the bond!

To make things quick & easy for you we pre-installed the 3M adhessive pad to the mount!

Easy to Follow installation instructions are included!

Preview the instructions below:

3M Cradle Mount Install Instructions:

**Be sure the machine mounting surface is near room temp, dry & is free of dirt/wax. A surface temp that is to warm/hot will substantially weaken the bonding strength! Do Not use “Goo-Gone” to prep the mounting surface. It's petroleum base content will result in bond failure!

Disclaimer: Due to the many uncontrolled variances for a proper install, RideLite International LLC is not responsible & will not warranty any bond failures under any circumstances.

1- Without removing the red 3M adhesive cover tape hand position the mount onto the machine to determine exactly how it will be positioned. With the mount held in its determined position apply 2 small pieces of masking tape to mark out the mounting location. Apply the masking tape to the machine indexing or marking the front & side of the 3M mount base.

2- Remove the red 3M cover tape from the mount base & install the mount onto the machine within the masking tape guide lines.

3- Firmly press down on All the mating surface areas 3M pad to the machine.

Note: The cradle mount has an index hole in the center of the cradle bracket so the mount can also be attached to the machine with a fastener- if desired.

 *Remove Light Head from the cradle mount during summer storage

*Vermont purchases are subject to Vermont's state sales tax.

Replacement Low Profile Cradle Mount
Click To Enlarge
  • Item #: 2000-3MCRMNT
  • Cannot ship to: Canada
  * Marked fields are required.
Price $22.00